Home            Workshop   Solutions                                        

The Drink Holder 2

Originator......Tom Jeary.


THE PROBLEM:  To provide a multipurpose drink holder allowing both hands to be free to control wheelchair movement.

THE SOLUTION:  A wide variety of holders can be build quickly and cheaply using 4" cut off lengths of 3" diameter PVC pipe. Lightly sand and varnish for a finished look. Drill cross holes of appropriate diameter at the bottom to glue in lengths of black fibreglass rod from a discarded umbrella. Appropriate brackets can be made from scraps of PVC and bonded strongly with PVC glue. or attached with nuts and bolts depending on where on the wheelchair/scooter they are going to be used. 

Home            Workshop    Solutions